Jason Jessee ‘Guadalupe’, Santa Cruz, Skateboard Graphic.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Black Transmission Distance: 0.3
Gray Transmission Distance: 2.5
Silver Transmission Distance: 3
White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #16 (1.36mm) swap to Silver
At layer #21 (1.76mm) swap to White for the rest.

These are the colours I used. But mix it up and have fun!
Resize as you'd like, just remember to keep the 'Z' axis at 100%.