Impossible Nut - Print in Place
Copyright Claim
Impossible Nut - Print in Place
Boost
19
28
19
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
52 min
1 plate
Boost
19
28
19
0
52
70
Released
Description
This is a true print-in-place impossible nut and bolt. No cheating by threading a nut on during the print of a bolt, this is all in one print!
Warning
Do not press auto-arrange in your slicer otherwise this print will not work. The part is separated into 2 different objects to make it easier for AMS or other multi-colour printers. If you print directly from the Bambu Handy phone app and increase the number of copies, the app will auto-arrange the parts.
Slicing
- 0.16mm Layer Height
- 15% Infill or 100% if you want a heavier screw
- No supports
Comment & Rating (19)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
prints very good and clean
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Had to drop the from 1m height to break the "seal". Cool model!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
nice fidget, really liked how it fit in my hand
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld