Grand Theft Auto V Trump is another photo-edited work, and I used hueforge to make this  2D artwork.  
Like most of my other models, I used Orcaslicer's configs in Bambu Studio and printed them out.

 I included the STL file. Once slot one is finished, you can swap color five into slot 1 of the AMS. Once you reach the paused layer, you can resume using the Bambu Handy phone app if you aren't home. 
 

Please like , print, and rate if you like these themed prints. Thank you .

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Matte Dark Red Transmission Distance: 1.5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Matte Ivory White Transmission Distance: 6

Swap Instructions:
    Start with Charcoal
    At layer #9 (0.8mm), swap to Blue Gray
    At layer #16 (1.36mm), swap to Dark Red
    At layer #18 (1.52mm), swap to Yellow
    At layer #21 (1.76mm), swap to Ivory White for the rest.