Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PETG JAYO Black Transmission Distance: 0.3

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Matte Ice Blue Transmission Distance: 3.5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:

Start with Black

At layer #4 (0.4mm) swap to Red

At layer #7 (0.64mm) swap to Yellow

At layer #10 (0.88mm) swap to Ice Blue for the rest.