⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏

Build plate holder for A1mini, screwable!

Screwable build plate holder for A1mini. This can hold 4 build plates very comfortably! 👌

This holder was specially designed to be very narrow while still holding the plates very well, and therefore it can be attached to the inside of the cabinet door to save space in the maker room, for example. 😉

This holder is easy to print on the A1mini - just use my well tuned print profiles.😍 I used two “Mice-Ears” for better bed adhesion there - just cut them off easily after printing (with pliers/cutter knife)👍

If you don't want to use print profiles - STLs with and without “Mice Ears” are attached here too. Just print them with default PETG/PLA settings.

Print Instructions:

• just use your favorite default PETG/ PLA profile, BUT - set your printer better to the “silent” mode for better quality of the walls!

Install Instructions:

• The two screw-holes have 4mm diameter - so the pan-head screws 3,5x15 would be the best choice! (diameter for the screw head-hole is 7mm)
• Of course you can also stick this holder with double-sided adhesive tape 😉

— ! —

Thanks for downloading and rating in advance and please don't forget to like this model! :-)

Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:

If you like my work and want to support me - please follow me https://linktr.ee/eds_3d_shop and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)