Wonder Woman String Art
Copyright Claim
Wonder Woman String Art
Boost
49
59
11
Print Profile(1)
0.2mm layer, 2 walls, 12% infill
Designer
4.2 h
1 plate
Open in Bambu Studio
Boost
49
59
11
3
81
31
Released
Description
.2 Layer Height
Do not rearrange file list.
If black not wanted. Leave black but select wanted color on the send screen before sending
Comment & Rating (11)
All
As you saw in my other posts/ratings, I love the art you created. They are in fact perfect for my family because I (the dad) identify with Superman, my son with Batman, and my daughter with Wonder Woman. I'm going to mount them all under my family crest as soon as I get them all done.
Meanwhile I did try this print and the red for some reason totally died on the stringing part. I used Eryone PLA +/pro red which has yet to cause me issues, but the blue and gold were fine so I have to believe there was something wrong with the red (which I have never done any strings like this before with it). About the only idea I had was to try and dry it in my filament dryer and try again.
The failure is not a total loss. I only have 1 AMS and thought the black might look good as red, but I think it's too much. So I am going to try white in lieu of black. If that doesn't work, I will try to figure out how to add a pause and swap the black with a different color.
(Edited)
The designer has replied
1
Reply
Thank you!
I believe the issue with the red was the way it is sliced. When the body color and the string color are the same, it doesn't create the valleys correctly that hold the strings. using white will fix it as it will be a different color than the string.
0
Reply
Happy to help troubleshoot 😃
0
Reply
Replying to @EDDIEB3D_
That is amazing information to have. I would have never figured that out, so thank you so much!
Well my red is extra dry now.
1
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
This came out AMAZING. Bambu Basic blue PLA, Bambu Basic gold PLA, SUNLU white PLA+, ERYONE red PLA+.
Thank you again for your help troubleshooting why subbing red for the black was bad. Switching to the white for the base color (in lieu of black) I think turned out even better.
PRO TIP: Don't get excited and try to remove this print from the build plate right after it finishes. You will end up with stars stuck to the build plate and break the print. Let it cool and automatically detach first.
The designer has replied
2
Reply
Came out great!
0
Reply
the wonder women looks fantastic. When you print this be careful I had three stars break off. I just attached the starts to the wall in there position.
0
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
Work of art. Absolutely beautiful! Any planes for a Spiderman?
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 12% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
0
Reply
No more
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld