This housing holds the GaggiaBoard V3 from the Gaggiuino project, with maximum coverage to protect from a potential water leak.
Design intent is for the board/housing to go in the corner vertically behind the funnel in a Gaggia Classic | Pro, but it will also fit in other espresso machines.
The base can be adhered to the housing with high-temp double-sided tape or a magnet and the top removed for connecting/disconnecting wires.
Optional Parts:
Print recommendations:
Print orientation per files (vertical), PETG, no supports, 0.4 nozzle, 0.2 mm layers, 2+ wall lines, 20% Gyroid fill. You can use 0.3 mm layers with this model, but I'd still recommend 0.2 mm for cleaner snap fit and better strength.