Compact 10pc BambuLab Build Plate Holder Caddy Cradle - Only 250g
Copyright Claim
Compact 10pc BambuLab Build Plate Holder Caddy Cradle - Only 250g
Boost
19
36
12
Print Profile(1)
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
Designer
6.8 h
3 plates
Boost
19
36
12
1
97
99
Released
Description
10x BambuLab Plate Holder
BambuLab 10pc Build plate cradle.
Only 250g, 6hr 45min print time.
Vertical Position
Width 53mm
Height 272mm
Depth 256mm (Without plates)
Each Plate Protrudes 1.5mm more then the previous layer.
Requires; 8x M3 25mm Head Screws - Please see last picture.
Comment & Rating (12)
All
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
It would be good if the plate in the back didn't exceed
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
This print profile allowed me to slice print and go. in combination with the textured pei sheet 100% would recommend
1
Reply
did a redesign on this. needed a slightly wider slot for the build plates I am using for petg/asa. I use a light year g10 build plate that is thicker then the standard build plate. (1.5mm thick g10 plate with a .6mm metal plate.)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
The designer has replied
1
Reply
thank you for the 5*, much appreciated
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, Top/bottom shell;4, supports/brim OFF, Gyroid.
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld