A simple 3D printable version of ROGUE 45LB Bumper plates. One side of the model is Flattened, with a fillet on the edge, so that when you print it everything comes out alright (if both side of the plate had the text and notch, the bottom side wouldn't look good). I still uploaded both versions, FULLDETAIL being an exact replica of the real thing, while 3DPRINT is the one I recommend.

I will eventually upload a bar, a bench, etc, so any feedback is appreciated. As for the measurements, the collar width (side of hole) is 5.4mm, and the diameter of the plate is 4.5 cm, so just above the diameter of a golf ball.

The collar (metal part) is the same for both versions, and can be printed at 99% scale to guarrantee that it fits. Just attatch it to the ring afterwards using some glue to make sure it never comes off again.

As for the text, white marker or paint can be used to paint the surface to give it the same appearance as the real thing.