Tags and Labels for the Keychain by Jorge Rui

Jorge Rui

Household>Other House Models

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

1.6 h

2 plates

4.5(13)

0.16mm layer, 2 walls, 15% infill

1.7 h

2 plates

5.0(1)

0.2mm layer, 2 walls, 15% infill

1.8 h

2 plates

5.0(1)

Boost

189

662

330

Released

Description

Instructions

This is part of this project, Keychain and Tags so you can change these documents to suit your needs.

Print instructions

In the case of Tags, it is necessary to indicate in the slicer in which area you want to pause to insert the magnet.

This is already prepared on the 3mf files available for download, but you can do it on your own.

After a couple of minutes, the printer will pause, it's time to insert the magnet. It will not top on the socket but, should be easy to insert it. Do not hard press the build plate!
1. CHECK THE MAGNET POSITION 2 TIMES TO BE SURE, it should attract in this position:

Be sure that the magnet is nicely flushed, if it is above the print layer, do not continue.

Resume printing.

This image, show the difference between a 0.2 and a 0.4mm nozzle:

Support the designer:

This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to buymeacoffee or paypal, or even better, join “My Club” here in printables.com, that will be greatly appreciated.

And check my other projects, maybe you find there something usefull

tag

label

Comment & Rating (24)

@craigtbii

Print Profile

0.2mm layer, 2 walls, 15% infill

It came out well but I had to find the blanks on another site.

@3DprintMyLife

I like it :) My feeling is, the magnet is a little bit weak ... but i am not sure, its just a feeling, for a single normal key its plenty enough.

@emanuele.10392

Print Profile

0.16mm layer, 2 walls, 15% infill

Good

The designer has replied

@Gerard74

thanks

(Edited)

@shawn.stennett

Is there a version without the lettering? I can remove the color from it but not the recess for the letters. I would like to add my own words.

The designer has replied

@JorgeRui

hi. you can find more option on my profile on printables.com https://www.printables.com/@jorge_rui

@DanielNimmervol

I miss the key fob for the mailbox.

@Rumlak

Greate design, but I have a suggestion for the key tag. You should make the back fit over the "peak" on the wall mount. That should give the small magnets a bit more hold with the assistance of more friction. It should also make it harder to knock the off the mount on accident.