Xenomorph al acecho en una roca, esperando a sus presas. Usando hueforge para imprimir en 3d

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Smart Pale skin Transmission Distance: 5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Pale skin
At layer #12 (1.04mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Jade White for the rest.