The main box can comfortably fit most gift cards, but has enough height to fit other small objects. The exact dimensions are W55 x H14.5 x D86mm.
BOM
- 10x M5 Nuts
- 10x M5x8 Socket Cap Head Screws
- 16x M3 Nuts
- 10x M3x20 Socket Cap Head Screws
- 6x M3x12 Socket Cap Head Screws
For a perfect fit, all screws should be to the DIN 912 / ISO 4762 standard.
Slicing
- Slice in the imported orientation for supportless printing.
- 0.2mm Layer Height.
- 3 perimeters / walls for “Layer 2 Bolt”.
- I recommend printing with a brim for all files, especially the bolts.
- Print 4 bolts.
- Print 2 of “Layer 3 Half”.
Printing the bolts together or in pairs helps to prevent overheating the layers, but unless your retraction settings are dialed in, you may produce lower-quality threads.
Post Print
- The counterbored nuts and bolts are printed with a very thin layer to enable supportless printing. Simply poke a hole through these before inserting the bolts.
Here's a YouTube Short for reference