Here is a lttle Balrog Card, i whiped up as a Hueforge.
it should be 75x100 mm tall.
As usual with hueforge, here is how to change the fillaments:
Swap Instructions:
Start with Charcoal Black
At layer #11 (0.56mm) swap to Red
At layer #14 (0.68mm) swap to Orange
At layer #22 (1mm) swap to Yellow
At layer #36 (1.56mm) swap to White for the rest.
Fillaments i used for the Print:
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite White Transmission Distance: 5
Have fun printing