Chicago Blackhawks - NHL Hueforge
The rest of my NHL Hueforges can be found in this collection here:
https://makerworld.com/en/u/4065522623/collections/549654
I designed a Friction Fit Frame Frame that can be found here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475
I wanted to keep this print to 4 colours like the rest of my NHL designs, though I may revisit it in the future as a 6 colour print if its popular enough.
I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
Please post a picture of your printed copy! I'd love to see it!
If you like my work and want to leave a tip to help with the costs of filament donations can be made here:
https://www.paypal.com/donate/?hosted_button_id=9BVH6Q453Y2K8
— Printing Instructions---
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Blue Gray
At layer #20 (1.68mm) swap to Latte Brown
At layer #24 (2mm) swap to Ivory White for the rest.