Modern LED light to install on the ceiling.
Mounting is very simple, just print all the parts and follow these steps:
- Glue the circle to the main body. It's separated so that no supports are needed
![](https://makerworld.bblmw.com/makerworld/draft/727464/2024-03-18_2e9ea196c693e.jpg?image_process=format,webp)
- Install the LEDs, I used 10mm 12v white strip, but you can use whatever you want. Install it on both sides
![](https://makerworld.bblmw.com/makerworld/draft/727464/2024-03-18_08a6d52d58096.jpg?image_process=format,webp)
- Connect the cable and the ac adapter, i used 0.5mm2 red and black. You need to use small cables, otherwise they will not fit.
![](https://makerworld.bblmw.com/makerworld/draft/727464/2024-03-18_577e8d169301c.jpg?image_process=format,webp)
- Glue the diffuser on top of the LEDs. Better to print it with PETG if you plan to use high power LEDs, PLA would melt.
- Install on the ceiling, as you would do with a normal lamp :)
In my case, the LEDs where 10W/m, I used 1,5 meters, so used 2Amps adapter. You will need to scale it the your needs.