The following model is used to adapt the Samsung Odyssey interface of the monitor from the original configuration of the original arm to the more common Vesa 100x100. This allows to attach the monitor to a movable arm. There are 4x M5-45 screws wich are inserted to prevent creep elongation of the material due to the static weight of the monitor.

This is the first version of the model. Any suggestions to improve is accepted.

For the following  montage you will need:

• 4xM4-20 screws for the vesa interface
• 4xM4-16 for the monitor interface
• 4xM5-45 with counter sunk head 45 degrees for creep prevention
• 4xM5 nuts