BMW X5 E53 front door 6.5" speaker adapters by garrett1966

garrett1966

Hobby & DIY>Vehicles

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layers with 8 top and bottom, 5 walls, 25% infill - strong print

Designer

9.7 h

2 plates

Boost

Released

Description

This adapter lets you replace the factory speakers which are in a weird housing with standard 6.5" speakers.

This should be printed in ASA, ABS, or possibly PETG. PLA would not last long.

If you appreciate my work and want to support me, you can buy me a coffee.

Comment & Rating (3)

@keikedeike

Good design thanks for that Fits perfectly in the front doors. You could add a cut-out for the speaker wires so that they are not trapped between the adapter and the door. (I use the original plug) cheers

(Edited)

The designer has replied

@garrett1966

I plan to design adapters for the rear doors eventually. What I did was re-routed my speaker wires so they are inside the door and did not need to be pressed between the door metal and the adapter. I separated them from the harness and passed them inside the door where there was another opening.

@keikedeike

Replying to @garrett1966 :

i made a design for the rear!

No more