----------------------
SETTINGS / PRINTING (recommendation)
Filament: PETG or PLA. Please note that PLA can deform/break down in the sunlight. In addition, some types of PLA are biodegradable.
Print: 0.2mm
Nozzle: 0.4mm
Support: Yes, tree/organic - inside of the bowl (see the last image)
Print orientation: On the backside
Brim: No
Infill: 100% (solid), to minimize the probability of holes and water damage to your wall,
Perimeters: at least 6, even better 15, to minimize the probability of holes and water damage to your wall
OTHER
- If you are worried that the planter might leak, use a waterproof sealant spray (for example Rust-Oleum Crystal Clear) inside the planter, 3-4 coatings should be enough.
You could also read the official Prusa blog post “Watertight 3D printing PT1: Vases, cups and other open models”.
- To make the planter smooth and shiny, use sandpaper, prime it, (spray)paint it a couple of times, and use a varnish coat on top.
Happy Printing!
--------------
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.