Charizard Card Keychain (Hueforge)
The shown image has a clear coat of epoxy on it, but it is a beautiful print!
I used a .2mm nozzle, but .4mm will work if you scale everything up!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Orange Transmission Distance: 7.5
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Azure Blue
At layer #12 (1.04mm) swap to Orange
At layer #13 (1.12mm) swap to Scarlet Red
At layer #17 (1.44mm) swap to Yellow for the rest.