GIF
Print Profile(3)
0.2mm layer, 3 walls, 15% infill
Designer
41 min
1 plate
A1 Mini 0.2mm layer, 2 walls, 15% infill
Designer
46 min
1 plate
A1 mini, 0.2mm layer, 3 walls, 15% infill
48 min
1 plate
Open in Bambu Studio
Boost
199
371
46
9
437
355
Released
Description
Towel Holder for Radiators
Quick-to-print towel rail for wall radiators, with fold-out hook.
The hook is connected with a piece of 1.75 mm filament.
Insert the thread from the right-hand side, the hole on the left-hand side is smaller to hold the connection.
The hooks are designed for radiators with a diameter of approx. 23 mm and a spacing of 66 mm.
You may also like:
 |  |
Comment & Rating (46)
All
Print Profile
A1 mini, 0.2mm layer, 3 walls, 15% infill
Perfect size for our bathroom radiator. However, I used a piece of wire as a connector. Thanks for sharing.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Sehr cool und funktional.
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 15% infill
rly like it
0
Reply
Cant fit the filament into the holes.. tried to make them bigger and the whole thing broke. 🤣🤣
0
Reply
Print Profile
A1 Mini 0.2mm layer, 2 walls, 15% infill
prints well. hole for filament is quite tight.
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
A1 Mini 0.2mm layer, 2 walls, 15% infill
könnte straffer sein aber funktioniert tadellos
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
it does its job, a little over complicated for it's role but that's ok
0
Reply
Print Profile
A1 Mini 0.2mm layer, 2 walls, 15% infill
Sadly doesnt rly fit anywhere - so i canmot really use it. The print itself. worked out fine tho.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld