modern shower head by Staprin3D

Staprin3D

Household>Other House Models

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 4 walls, 30% infill

Designer

7.5 h

1 plate

4.8(18)

Open in Bambu Studio

Boost

161

177

Released

Description

Modern shower head

Here is a modern design for a shower head.

The connection thread is 1/4 inch

Printing best in PETG

Assembly:

The shower ring is mounted on the cone of the handle with a little glue. It is best to screw the threaded piece into the handle using a little adhesive.

Insert a standard seal to connect the handle to the hose.

I have been using the shower head myself for a few weeks now and it works perfectly.

PS: you can find the shower head holder on the photo at ThreeD-Michael

Comment & Rating (28)

@wang7152

This part after the slicer will have some issues, but they can be fix by a Windows service.

The designer has replied

@Staprin3D

Thanks for pointing this out, I have since corrected the error and provided an updated print profile.

@Fabiounique

Boosted

Print Profile

0.12mm layer, 4 walls, 30% infill

top

The designer has replied

@Staprin3D

👍

@user_215806595

Printed in Prusament Galaxy Black PETG filament on a Prusa MK4 I printed each part separately. I used 0,2 mm layer height as I think that 0,15 layer height is overkill when using PETG. I used 15% gyroid infill in every part other than the head. In fact, Prusaslicer refused to create infill to that part which is good because infill would block water flow! Works well and delivers DeLuxe showering experience :)

@user_2569790239

Boosted

Print Profile

0.12mm layer, 4 walls, 30% infill

Printed in overture ASA, tolerances are pretty good. (sorry for the poor photos)

@user_1413529682

Print Profile

0.12mm layer, 4 walls, 30% infill

had to print PLA but it works great

@AngelsVenom

Boosted

Very good job. I really like the flow of the water and the overall style of the model.

The designer has replied

@Staprin3D

thanks ;-)

@GaudiestDawn

Print Profile

0.12mm layer, 4 walls, 30% infill

printed 3 times in PLA needs more neck options for different show styles.

The designer has replied

@Staprin3D

Hi, PLA is not the right material for the shower head, because it is not so heat-resistant. You should print it in PETG and it is also important to print it in good quality, i.e. 0.12 high quality.

(Edited)