Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Jade White Transmission Distance: 6

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Ash Gray
At layer #14 (1.2mm) swap to White for the rest.