Easter armored bunny铠甲兔子


Print Profile(6)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
P1S, P1P, X1, X1 Carbon, X1E, A11.5 h
4.8
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
P1S, P1P, X1, X1 Carbon, X1E, A12.4 h
4.3
A1-mini,0.2mm layer, 2 walls, 15% infill
A1-mini,0.2mm layer, 2 walls, 15% infill
Designer
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A11.8 h
5.0
new V3.0
new V3.0
Designer
P1S, P1P, X1, X1 Carbon, X1E, A11.5 h
Click to see more

205
320
44
665
309
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

一只复活节兔子,可以把彩蛋放到里面保护起来。

An Easter bunny that can put eggs inside to protect them

 

关于评论区很多人反应链接件不坚固,容易断裂,安装难的问题。

今天我修复了这个问题,V3这个是加强版本,更容易安装,链接件更坚固。
2024年4月9日修复

============================

Many people in the comment area reported that the links are not strong, easy to break, and difficult to install.

Today I fixed this problem. V3 is an enhanced version, easier to install, and the links are stronger.

Fixed on April 9, 2024


License

Comment & Rating (44)

Please fill in your opinion
0/5000

I like the design and it printed well in silk PLA. But when I tried to click the pieces together it broke. Do you have any advice? Should I print the bottom part a bit bigger to make it easier to put together the hinge on the backside?
(Edited)
The designer has replied
1
Reply
Thank you very much for your feedback. When installing, you need to install it from the back opening, but I will optimize this so that it is not easy to break.
1
Reply
I have modified it, thickened the lower body, and adjusted the width of the installation opening and uploaded it again. You can download it again if necessary.
3
Reply
Replying to @AIDUODUO :
Thank you! I will try it.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Sehr gut konstruiert, interessante Details und insgesamt wirklich aussergewöhnlich. Habe lediglich die Layerhöhe an der oberen Helmwölbung angepasst ( beim 2., silbernem Druck ), gibt ein schöneres Bild der Rundung. Wirklich schöne Arbeit, danke dafür!
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice design.
The designer has replied
0
Reply
Thank you for your feedback, it makes me more passionate about creating
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
super cute and printed well
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great print!! I did have to file down the connection a bit, otherwise I couldn't get it to fit.
0
Reply
Love the design :) printed quite well, although i did have a problem with the tangs that hold the top centred onto the bottom, 15 seconds with a file and they fit nicely now. Printer glitched half way through printing, but that wasn't the model
0
Reply
This was a really fun print! I had the same problem with the tangs breaking on the bottom piece. They broke when trying to put the top piece on and putting it on center, but I still worked great! it was nice for putting in my laser engraved egg for Easter.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Worked well. 83% fit a Cadbury egg. Removed the supports too fast on two of them and broke the bottom of the helmet.
(Edited)
2
Reply
is it possible to make a version without ears or horns
The designer has replied
0
Reply
OK
0
Reply

Remixes (0)

There are no remixes yet