Princess Peach ear for the 5 magnet NX3CREATIONSLLC Disney headband. You will need 5 6x3mm magnets and some super glue to make sure that they stay put.
This print has 5 colours so you will need 2 AMS. You can get away with just 1 AMS but I don't recommend it.
I used a .4mm nozzle, but this would look better with a .2mm nozzle to improve some of the smaller details like the nose.
I scaled the original ear model up slightly to make it easier to put in the magnets (instead of the holes being 6mm in diameter they are now approx 6.2mm). So to be safe you should also use glue for the magnets.
For the colours I split everything to parts and painted each part. In order to cut down on the filament changes I added a modifier to the middle layers to cut down on the number of filament changes.
Let me know if you have any suggestions or issues with the print. And if you print it, please post your make in the comments!