Ultimate Bolts, Screws, Nuts, and Washers Set M8

Ultimate Bolts, Screws, Nuts, and Washers Set M8

Boost
32
83
6

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.16mm layer, 4 walls, 30% infill
0.16mm layer, 4 walls, 30% infill
Designer
3.2 h
1 plate
5.0(4)

A1 mini, 0.16mm layer, 4 walls, 30% infill
A1 mini, 0.16mm layer, 4 walls, 30% infill
3.5 h
1 plate
5.0(2)

Boost
32
83
6
1
143
51
Released

Description

Metric M8 Screws/Bolts/Nuts/Washers

 

These models are optimized for FDM 3D printing and should fit without the need for rescaling.

No supports needed if you print them standing.

They are still compatible with standard metal bolts/nuts.

For better strength, try printing them with a few more wall lines.

Smaller layer heights result in better threads.

 

DIN 933 Hexagon head screws

DIN 934 Nut

DIN 1587 Cap Nut

DIN 315 Wing Nut

DIN 125 Washer

DIN 9021 Washer

 

Other sizes:

M6

M10

M12

 

Recommended Print settings:

-PLA/PETG/ABS/PA/PC depending on the use case

-0,16mm layer height or smaller

-minimum 4 wall lines

-4 top an bottom layers

-30% Infill

 

Comment & Rating (6)

Please fill in your opinion
(0/5000)

Print Profile
0.16mm layer, 4 walls, 30% infill
Prints nice. Thanks
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
0
Reply
Print Profile
A1 mini, 0.16mm layer, 4 walls, 30% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
0
Reply
Boosted
Print Profile
A1 mini, 0.16mm layer, 4 walls, 30% infill
0
Reply
No more