This is a jig for drilling plywood / mdf firewalls for the Flite Test Power Pack B.
Simply cut to size and then use the drill holes to get constant accurate holes in the wood.
To use the jig you will need:
8mm (5/16 inch) Drill for the 2 large holes
4mm (5/32 inch) Drill for the 2 holes that mount the pack in the foam - I haven't used this yet so it may not be perfect.
3mm (1/8 inch) Drill for the holes for the motor mounts
Hardware to join the two together is;
4 M4 x 20mm Bolts.
I built this as I have crashed more than I have flown at the moment.
Please note this is a jig and to be used on a suitable surface, do not drill the parts whilst holding the Jig.
No copyright infringement intended.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
40% Bottom Half, 10% Top half
Notes:
Please note this is a jig and to be used on a suitable surface, do not drill the parts whilst holding the Jig.
![](https://makerworld.bblmw.com/makerworld/draft/78679/2023-10-10_i2udksx6cayf.jpg?image_process=format,webp)
![](https://.s3.amazonaws.com/?AWSAccessKeyId=AKIAJ4LU5KWCMM7WB7YA&Expires=1590400474&Signature=wXqAmJAUYH3KwefIpjv25yPjsfk%3D?image_process=format,webp)
![](https://makerworld.bblmw.com/makerworld/draft/78679/2023-10-10_owqxnye6ko91.jpg?image_process=format,webp)
![](https://makerworld.bblmw.com/makerworld/draft/78679/2023-10-10_xy4b6pg6btzx.jpg?image_process=format,webp)