A simple pot platform to raise your plan pots above the ground. Made somewhat modular for easier printing of large sizes on typical bed sizes. All pots that needed it so far fit on my ender 3 buildplate.

I went through several iterations and this the most stable and strongest version so far. I have supplied a few typical sizes here, but in general it is probably better to just download the fusion file and adjust the parameters to what you need.

In my experience it is not necessary to print with more than 2 perimeters and 15% infill. If you plan to use them outside I would suggest using PETG or ASA (at least not PLA since I've noticed it starts to bend after a while and ABS, because it will deteriorate).

Requires a single M4 bolt and nut per leg. I use 12mm bolts with a cylindrical head and a flathead screw, but multiple types and lengths should work.