NOTE: If you change its size, manipulate it without changing the z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA Black Transmission Distance: 0.7
    PLA BambuLab Basic Red Transmission Distance: 4.7
    PLA BambuLab Basic Yellow Transmission Distance: 8.4
    PLA White Transmission Distance: 8.6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Red
    At layer #12 (1.04mm) swap to Yellow
    At layer #15 (1.28mm) swap to White for the rest.