Pikachu Ear for 5 Magnet Modular Headband Remixed by jonoitz

Remixed by

jonoitz

Props & Cosplays>Other Props & Cosplays

Print Profile(1)

All

0.2mm layer, 2 walls, 10% gyroid infill

Designer

1.7 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

v2 2024-04-24:

slightly larger nose and thicker black border around pikachu
split to parts and coloured each part. to reduce filament changes I added a modifier to the middle layers to cut down on the number of filament changes.
set the infill to 70% rectilinear for yellow and red parts so that the infill pattern will not be as apparent

Pikachu ear for the 5 magnet NX3CREATIONSLLC Disney headband. You will need 5 6x3mm magnets and some super glue to make sure that they stay put.

I scaled the original ear model up slightly to make it easier to put in the magnets (instead of the holes being 6mm in diameter they are now approx 6.2mm). So to be safe you should also use glue for the magnets.

If you have a second AMS you can paint the tongue pink, but since I only have one I set it to red.

Let me know if you have any suggestions or issues with the print. And if you print it, please post your make in the comments!

Comment & Rating (3)

@user_3864056220

Print Profile

0.2mm layer, 2 walls, 10% gyroid infill

my Duaghter really liked this, I did do it in petg but I ended up having to repaint it and reprint because the black infill was very visible through the yellow.

The designer has replied

@jonoitz

thanks for letting me know! i updated the model to split each colour to parts and set the infill for the yellow and red to 70% rectilinear so hopefully the infill pattern will not show through as much

@user_3864056220

what a champ! thanks again the kids are loving this!

(Edited)

No more