Print at 100% infill with a layer height of 0.04mm using 3mf in raw data (Makerworld is not allowing print profile upload due to file complexity even when reduced to 0.08 mm layer height) with a base layer of 0.16mm

Filaments Used:

PLA PolyTerra Charcoal Black Transmission Distance: 0.3

PLA Sunlu Meta Grey Transmission Distance: 3.5

PLA+ IIID Max Vanilla Cream Transmission Distance: 7.8

PLA Hatchbox White Transmission Distance: 10

Swap Instructions:

Start with Charcoal Black

At layer #26 (1.16mm) swap to Grey

At layer #34 (1.48mm) swap to Vanilla Cream

At layer #39 (1.68mm) swap to White for the rest.