Instructions to edit text:
- Rotate plate to view from underneath.
- Click on “Objects” tab under the Filament selection.
- Right click on “edit this name text”, and edit the text, font, and size.
- Click “Slice Plate”.
- Warning Verify that the text and the picture frame are both on the first layer. If not, move the picture frame down to the first layer or start the process over. Sometimes during the manipulation of the text, the bodies move slightly. Do not print unless everything is flush on first layer!
- For best text results, verify that the color of the key chain prints before the color of the text. Click the hexagon settings button on the plate to verify the first layer sequence.
- Important, let the bed completely cool before pulling off the frame and the back lid to prevent warping!