Darkstar Kit Card by Crea_Hicks

Crea_Hicks

Hobby & DIY>Vehicles

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 2 walls, 15% infill

44 min

1 plate

1.8(5)

Open in Bambu Studio

Boost

113

153

289

Released

Description

Print this awesome Darkstar Kit Card and explore the world of jets!

If you have any questions or other things to say you can always contact me.

Comment & Rating (13)

@M.verbeke

I think the model is way to small and to flat to be printed properly. Even at 0.08mm Layer height the layer shifts are to extreme to get a nice surface? Have you ever made a testprint of it? Even if the printing can be carried out successfully, the connector bars are far too bulky to be removed without destroying the model. :-(

The designer has replied

@crea_hicks

I will fix the problem with the bulky connector bars. Unfortunately the real plane is simply that flat so I cannot change those properties. I have made a testprint (0.05mm layer height) and it worked fine for me. Have you used supports for the nose?

@M.verbeke

Replying to @crea_hicks :

That would be great. An other possibility would be to scale the whole thing up, I'll try that. And I will try 0.05 Layer hight too. Thanx for the hint. I added some supports on the ducts (in and outlet) and underneath the wing. not yet on the nose.

@M.verbeke

Replying to @M.verbeke :

0.04mm, some more support. one step closer, still not there yet :-)