Please take the time to read before you print, thank you.

THE MODEL IS LAYING FACE DOWN ON ITS FACE on the build plate for you already!
The smooth or textured side of the model when you take off your build 
plate is the front of your model. You will want to turn on the ironing option if you would

like a better looking back.

++You can scale this model up or down; I personally keep them A1 Mini plate sized so everyone can

print these. Anyways, you can scale it up or down and in the process, you will want to adjust the thickness

of the file. I personally keep them at 2.50 mm to 3 mm thick but if you scale up or down it will change the thickness.

So to adjust the thickness you will need to ope nthe model in the slicer then highlight the model, click the scale

option then from there you will see a blue tab on your model, you will want to grab the blue tab and drag it up or

down according to the thickness you would like. :) 

-If you are having adhesion issues, please slow your machine down for the first
several layers.
-Please use glue adhesive if you are having issues with the print sticking
-Message me directly if you need ABSOLUTELY any help or have any questions.