对原作进行了加长,同时对一些细节进行了修改更便于无支撑打印,不需要金属件。如有需要可以底板涂点胶水。
The original work has been lengthened, and some details have been modified to make it easier to print without support.No metal parts required.If necessary, apply some glue to the plate.
2024/3/19:
增加了一款刀片,根据微技术Microtech刀型制作。可以直接替换原刀片。刀尖尖锐,请注意安全。
A blade has been added, made according to Microtech knife type. Can directly replace the original blade.The tip of the knife is sharp, please pay attention to safety.
2024/3/31:
很多人想要短款的。我重新上传了75cm的版本。
Many people want short styles. I re-uploaded the 75cm version.
2024/4/7:
我制作了一个梳子版本。
I made a comb version.
重新制作了带系绳孔的刀柄,并修复了非流形错误。
Reworked the hilt with lanyard holes and fixed non-manifold bugs.
加大了一点刀钮尺寸,放在源文件里的pin set V2.stl,如果还是太松可以用点胶水。
Increase the size of pin set and put it in the ‘pin set V2.stl’ in the source file. If it is still too loose, you can use some glue.