This one is a 6 plate, 6 color HueForge of the Harley Davidson Logo.

The total dimension are 765x376mm or 30,11"x14,80"

There is also a 1-plate model (255x125,5mm or 10"x5") included.

Enjoy!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BumbuLab Matte Charcoal Transmission Distance: 0
PLA BambuLab Basic Red Transmission Distance: 4.8
PLA BambuLab Basic Orange Transmission Distance: 4.8
PLA BambuLab Basic Gold Transmission Distance: 4.8
PLA eSUN White Transmission Distance: 1.6

Swap Instructions:
Start with Matte Charcoal
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to Orange
At layer #20 (1.68mm) swap to Gold
At layer #26 (2.16mm) swap to White for the rest.

All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..

So, if you like my work you could

buy me a coffee if you like. 😉

https://www.buymeacoffee.com/a.vdh_83

Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL