To assemble this box you will need:
6pcs - M3 screw with a length of 30mm.
2pcs of screws are used as rear hinges of the box and another 4pcs of screws are used to mount the closing clips.

If you decide to make the box a DRY BOX for direct printing and store 2 spools of filament (for 1kg spools), you need to replace the box lid and print the base with bearings. Below is the list of parts needed to build the DRY BOX.

4pcs 608 bearings
2pcs - M8 threaded rods 164 mm long
2pcs - Pneufit PC4-M10 connector
Thread G1/8
Suitable for 2/4 mm diameter bovden.

The box allows the insertion of a label on the outside with a description of the inserted materials. (Material type, manufacturer, printing temperatures and other necessary information. The space for inserting the label is really big, so you won't miss any necessary information.

Really very large box for storing tools or other materials.

Two 1kg spools of filament can be comfortably stored in the box.