Synology DS920+ Wall Mount

Designed as a custom mount for the Synology DS920+, providing a seamless and secure docking solution.

Mounting Mechanism: The design features 3 screw holes for each component. Additionally I added options to make cable management easier, with the half-circles embedded in the design. Compatible with a variety of surfaces, including under desks, on walls, or beside workstations. I would not recommend mounting this with adhesive tape only.

Material Suggestions: While the model can be printed in various stronger materials, PET is recommended from my side, as the device it self is a bit heavy and there is constant vibrations from the disks.

Printing Recommendations:

• Layer Height: 0.2 mm for a good balance between print quality and speed.
• Walls: 4 or more.
• Infill: 20% for sufficient strength without excessive material use.
• Supports: Not necessary for this model.