I SUGGEST BLUE SILK FOR SHINING EFFECT OR REPLACE WITH BLUE MARINE MATTE BAMBU
File is ready to print, if u want to change frame color swap LASTS layers
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Silk Transmission Distance: 2
PLA Bambulab gold Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue SILK
At layer #11 (0.96mm) swap to Gold
At layer #15 (1.28mm) swap to Jade White for the rest.
Reminder:
My models mostly cover the entire bed,
this means the purge line is sometimes
running through the bottom of the print.
You have 3 options here:
- Leave as is, you can just cut them of afterwards.
- Remove immediately after the purge line is printed.
- Scale the model:
*** WARNING ***
WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT!
The Z-height must always be as original, otherwise the print
is messed up.
If u want to support my work
https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT
For request send me dm