Here is my little branching Fox HueForge Print.

Layerheight is at 0.08 mm with the standart 0,4mm Nozzle.

The first Layer goes with 0,16mm

in Total, 5 Colors where used.

mine where

PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite White Transmission Distance: 5
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite White Transmission Distance: 5

Feel free, to use your very own colors and suprise us with your creativity.

The Fillamentchanges whare as follows

Start with Charcoal Black
At layer #7 (0.64mm) swap to Red
At layer #9 (0.8mm) swap to White
At layer #10 (0.88mm) swap to Orange
At layer #13 (1.12mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.