Sunlu S2 Tray
Copyright Claim
Sunlu S2 Tray
Boost
20
62
19
Print Profile(3)
PETG 0.4, 0.2mm layer, 4 walls, 100% infill
Designer
1.2 h
1 plate
ASA 0.4, 0.2mm layer, 3 walls, 25% infill
Designer
1.1 h
1 plate
A1 Mini PETG 0.2mm layer, 4 walls, 30% infill
1.3 h
1 plate
Boost
20
62
19
0
98
79
Released
Description
Simple tray to put/dry Silica|Desiccant Containers in your Sunlu Filament dryer.
Recommendations:
- Think about adding additional bottom/top Layers and perimeters to increase stability
- Use at last PETG (for me works for 50-55° Dryer temperature) or consider something with even higher Temperature resistance
- Print upside down
Update: 30.09.2023 adjusted distance for better fit on the Rolls in the S2
Comment & Rating (19)
All
Print Profile
ASA 0.4, 0.2mm layer, 3 walls, 25% infill
printed with Rosa3D ASA silver, worked perfect.
(Edited)
1
Reply
Print Profile
ASA 0.4, 0.2mm layer, 3 walls, 25% infill
fit perfectly!
1
Reply
Print Profile
PETG 0.4, 0.2mm layer, 4 walls, 100% infill
simply and good. easy and fast to print
0
Reply
Print Profile
PETG 0.4, 0.2mm layer, 4 walls, 100% infill
0
Reply
Print Profile
ASA 0.4, 0.2mm layer, 3 walls, 25% infill
printed okay for what I needed. Next time ill properly calibrate the ASA filament that I used as it left a rough finish.
1
Reply
Print Profile
PETG 0.4, 0.2mm layer, 4 walls, 100% infill
good print
0
Reply
Print Profile
PETG 0.4, 0.2mm layer, 4 walls, 100% infill
1
Reply
Print Profile
PETG 0.4, 0.2mm layer, 4 walls, 100% infill
1
Reply
Print Profile
PETG 0.4, 0.2mm layer, 4 walls, 100% infill
1
Reply
Print Profile
PETG 0.4, 0.2mm layer, 4 walls, 100% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-NoDerivativesRelated Models
© 2024 MakerWorld