608 Bearing Fitment Test
Copyright Claim
608 Bearing Fitment Test
Boost
1
5
1
Print Profile(1)
0.24mm layer, 2 walls, 15% infill
Designer
1.4 h
1 plate
Open in Bambu Studio
Boost
1
5
1
0
10
3
Released
Description
I made these to test the tolerances of my 3D Printer for a 608 Bearing to have the perfect fit.
There are 2 Types of Models:
- Inner Diameter of Bearing
- You have to subtract the number that stands on the model from the inner diameter from the bearing
- for example: Number on the Model = .25 ==> d = 8mm - 0.25mm = 7.75mm
- You have to subtract the number that stands on the model from the inner diameter from the bearing
- Outer Diameter of Bearing
- You have to add the number that stands on the model from the outer diameter from the bearing
- for example: Number on the Model = .25 ==> d = 22mm + 0.25mm = 22.25mm
- You have to add the number that stands on the model from the outer diameter from the bearing
Comment & Rating (1)
All
Print Profile
0.24mm layer, 2 walls, 15% infill
Fast test to find out tolerance, but maybe you should add one with 0 tolerance, for me none of the inner diameter fitted because it was too small.
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld