Leaf Masquerade Mask by PenolopyBulnick

PenolopyBulnick

Props & Cosplays>Masks & Helmets

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

Leaf Mask

Designer

57 min

1 plate

2.5(2)

Boost

Released

Description

This leaf mask is in the same manner as my moon and stars where you print the first layer, pause the print, add tulle, and continue the print.

The pattern is leaves in a symmetrical pattern.

After it's done, you cut out the mask and out the eye holes.

I printed on Ivory Tulle to match my skin tone, but you can go crazy and do any color you want.

Attach a ribbon to each side to tie on. I cut into two holes on a leaf on each end to thread through and attach the ribbon I've also used double sided tape to just tape it to my face so it really looks like it's floating there!

More information on the design and printing process: https://www.instructables.com/Flexible-3D-Print-Masks/

I also have earrings that match this mask: https://makerworld.com/en/models/38457#profileId-37296

Comment & Rating (11)

@StarTrekReplica

very creative way of using tulle for creating a mask! For a second I thought the net which holds all the pieces together was also 3d printed! ;)

The designer has replied

@jbones

I thought the tulle was as well. super creative nonetheless

@PenolopyBulnick

Thanks! I did experiment with doing the first couple layers connected with flexible filament, but ultimately the PLA doesn't want to stay stuck to the TPU and results in a mask that doesn't necessarily work as well. https://www.instructables.com/Floating-Mask/ Actually, I could probably try this again, I haven't done it in a few years and I've learned a lot since then.

@StarTrekReplica

Thanks for the behind the scenes infos! I started 3D printing half year ago and I am still amazed what you could do with 3d printing. I am sure in 10-20 years everyone will have a 3d printer at home just like todays ink jet printers. :)

@gmerelas

So creative! I might copy this trick for my creations!

The designer has replied

@PenolopyBulnick

I’d love to see what you come up with!

@user_4273906466

the printer's tempture does not melt Tulle ?

The designer has replied

@PenolopyBulnick

It never has for me. I've printed a ton of masks since I sell them on Etsy and the tulle has never had issues except getting caught on the nozzle once in a while if it isn't taped down well enough.

@flatopossum

Print Profile

Leaf Mask

why won’t it let me rate it high even if I cancekbit

@teozbernie

Print Profile

Leaf Mask

The designer has replied

@PenolopyBulnick

hey! Just curious about the issues you encounter printing this? I know these masks can be very finkicky and am curious how I can improve on the print profile for others in the future.

No more