Screw Top Koozie (12 oz can insulator) by Mike415

Mike415

Household>Other House Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 8% infill

Designer

1.8 h

1 plate

4.7(34)

Open in Bambu Studio

Boost

110

211

275

Released

Description

This is a simple screw top koozie/can cooler made for 12oz/355ml cans. You can add personalization in Bambu Studio. (I do 0.5mm depth and inset)

When printing, make sure that threads are low layer height and give the screw top 3 wall layers (I use adaptive layers at quality 0.12)

If you enjoy you can Buy Me a Coffee

Comment & Rating (46)

@Quan1um

Thanks for the inspiration for the koozie six-pack I remixed.

(Edited)

@HUMMER396

Print Profile

0.2mm layer, 3 walls, 8% infill

The file printed just like it should, no problems at all. The top screws on with no problems and it fits the can great! Thanks!

@Qjeezy

Print Profile

0.2mm layer, 3 walls, 8% infill

this is great! the printed awesome and the threads work really good. The fit with a can is good, not too tight and not too loose. overall this is a great print!

@quirkyturtle

Print Profile

0.2mm layer, 3 walls, 8% infill

love this print!

@blchandl2

Boosted

Print Profile

0.2mm layer, 3 walls, 8% infill

Great model! Printed great also. I am making these for our vacation with friends in June. Thank you!

@Quan1um

Print Profile

0.2mm layer, 3 walls, 8% infill

Printed great in Hatchbox PLA Stone Black.

GIF

@AcmeArt

Boosted

I love mine, Keeps my beer cold!

@leighmoroney

Have you got this print profile for A1 mini? :)

The designer has replied

@Mike415

I don’t, but I think you could load the existing profile into Bambu Studio and then just change it to the A1 Mini and rearrange the models to fit the plate if needed. The key to printing this is the low layer heights on the threads.

@leighmoroney

thanks . I'll give it a try (newbie)