Super Slim Bambu Lab Poop Chute (32mm Back Clearance) Remixed by SJ box

Remixed by

SJ box

3D Printer>3D Printer Parts

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.25mm layer, 2 walls, 15% infill

Designer

4.9 h

1 plate

4.8(33)

Boost

274

221

Released

Description

For those who need super slim Chute

32mm Back Clearance.

NOT RECOMMENDED if you DO NOT have a wall at the back of your Printer.
Print the Original Model in that case.

Comment & Rating (37)

@DirtyFacedKid

Perfect print! Thanks! Would have rated the print profile but I accidentally pulled the plate thinking it was finished @ 99.9% . . .oopsies

(Edited)

@jimdt7

Print Profile

0.25mm layer, 2 walls, 15% infill

Cool design for tight spaces, printed very well with Bambu Lab PLA Tough.

@BergAcht

Print Profile

0.25mm layer, 2 walls, 15% infill

@Rammfar

Print Profile

0.25mm layer, 2 walls, 15% infill

For a restriction of space, like if you are constrained and tight against a wall this is a good option. However, with the size of it with an AMS and a liberal attitude on printing multi colors, takes little time to get clogged up as it comes out. soon as the poop hits the bottom of the slide it starts to build up takes about 60 layers to start backing up. Gonna reconfig my workspace and pull away from the wall try a larger version of this model. btw, the print finish was amazing in matte black on my p1s.

@n.faustdoty

Print Profile

0.25mm layer, 2 walls, 15% infill

Prints great and aligns great. However the slim part clogs up and stops catching the poop.

The designer has replied

@SJbox

yes, it cant be helped if you have a narrow space at the back of your printer because the poop length is not very consistent. I just brush them off every other day.

@user_1525993619

Print Profile

0.25mm layer, 2 walls, 15% infill

nice slim poop bucket

(Edited)

@saltism

Could you possibly make some amendmentds to this to allow for some slim magnets to be added to this? i have a wall behind mine but I feel it would be a finished model with that option.

@BohemianPrinter

Print Profile

0.25mm layer, 2 walls, 15% infill

Works great for my setup. The back of my X1C is flush with the table and this works well. I keep an eye on the chute for clogs but haven’t had any issues.