I love dragons. My wife loves cats. So there it is - behold the mighty dragoncat!
You ask why? Well, because I can.
Feel free to experiment with filament colors, but provided look is guaranteed only with described filaments.
Hint: If you have white with higher TD, you might want to use it!
Hueforge description:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
Filaments Used:
PLA Aurapol Black Transmission Distance: 0.2
PLA Aurapol L-EGO Red Transmission Distance: 2
PLA Aurapol L-EGO Yellow Transmission Distance: 2
PLA Aurapol White Transmission Distance: 3
Swap Instructions:
Start with Black
At layer #10 (0.6mm) swap to L-EGO Red
At layer #14 (0.76mm) swap to L-EGO Yellow
At layer #18 (0.92mm) swap to White for the rest.