Loved the base model as the top was a very nice tight fit but still removable. But the slits were too large at 1.6mm allowing the many smaller (broken) bits of the Dry & Dry dessicant to easily escape. Remixed it to have 1mm slots throughout and virtually none of the dessicant escapes now. Added a stabilizing horizonal bar in the middle so that the vertical bars don't wobble too much and cause print quality issues. Other than that it has the exact same easy clip top and a good holding capacity.
DO NOT use the Bambu Handy option to print multiple of the single instance plate. If you do it consistently leaves a large blob on top of the lid in the same location every time. I've added 2x, 3x and 4x plates to allow printing multiple without hitting this cloud slicing bug.