A FLOATING SHOPPING LIST!
A FLOATING SHOPPING LIST!
Boost
56
55
6
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
56 min
1 plate
Boost
56
55
6
5
56
35
Released
Description
The SCARIEST thing you'll see this Halloween! Mr Krab's FLOATING SHOPPING LIST!!!!
This design was made using HueForge, and with keychains in mind. Both pieces are symmetrical, so you can use them as separate pieces or glue them together to make a full SHOPPING LIST.
No AMS required just black and white filament with manual layer swaps.
Hope you guys enjoy this design! Checkout my youtube for more designs in the future.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Jade White
PLA PolyTerra Charcoal Black
Swap Instructions:
Start with Jade White
At layer #2 (0.24mm) swap to Charcoal Black
At layer #6 (0.56mm) swap to Jade White for the rest.
Comment & Rating (6)
All
Boosted
$200
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld