I wanted a more flexible way to mount my Huion Kamvas Pro 16 (4K) when I use it as a monitor rather than drawing on it. To be able to use GoPro mounts felt like the obvious choice, as they are quite strong and versatile.

The design is partitioned into “main body” and “back”, with a GoPro back included. It would be fairly simple to make your own back, though. The holes are 50 mm apart in both directions, if you want to screw it directly onto something else. The holes are made to accept M3 bolts.

The Kamvas is 258 mm tall and 13.5 mm thick, and slides into the holder from the side. It's held in place very nicely in all directions but sideways, as I wanted it to be easy to grab it from the holder hanging on a wall or mounted to an arm, to quickly be able use it as a drawing tablet when needed.

I've made the main body STL so that it can be split into four separate objects for easier printing on different size printers. Make sure to use a fair amount of infill and a good amount of walls to make the structure strong, and I would recommend PETG filament, but it'll work with PLA too, I'm sure.

Please make sure you mount the device in a safe way, and make sure to test the mount strength before you hang your device. The creator of this design will not be liable for any damage to your device.