What is that noise in the dark? Sounds like some chains clanking…
Oh no, looks like the little ghost was put in chains centuries ago. No wonder he looks so sad.
Printing the ghost is straight forward: 3 walls, 5 tops, 4 bottoms, 8% gyroid infill and no support
The chain has the same setting but needs an additional brim to secure it to the bedplate. Otherwise the retraction and bridging can knock it off. For easier removal of the brim set the brim distance to 0.22mm. Setting the z-hop on rectraction to 1mm helps, too. See the 3mf file for details.
The chain assembly is simple - just clip the parts together. The ball halves need a tiny drip of glue. Use the midpin to perfectly align the halves.
You can print the ghost with glow-in-the-dark filament to make it appear extra spooky. Or place an LED candle under it for some light effects.
For storage the ghost is stackable.
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.