This is a Hueforge of The Corpse Bride.
Works well with any accent colour instead of the blue I used, or just black, grey and white if you prefer.
I used Bambu Labs Matte PLA Black, Grey and White plus ESun PLA+ Light Blue.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #11 (0.96mm) swap to Blue
At layer #12 (1.04mm) swap to White for the rest.